Nearly all of the time, companies will spend a lot of money to purchase their lift trucks. It is important, therefore to take proper care of your machinery to protect your investment into the long run. It is really a great idea to know the procedures which are carried out during the maintenance and care of this piece of equipment.
Among the best ways to tell how good the engine is performing is by starting the lift truck up and listening closely to see how it works. For instance, if there are any knocks or misses, the equipment is faulty and this must raise several concerns. In addition listen carefully for any squealing noise which come from the belts because these noises would provide you with a lot of information.
Some of the main components requiring attention during maintenance include the safety warning devices, gauges, horn, the overhead guard and the lights. Any faulty components or burnt out light bulbs have to be replaced as soon as they are noticed. It is also imperative to check the wiring.
The battery compartment terminals must be cleaned after the above components have been checked thoroughly. If the terminals are not clean, be sure to clean them properly. Each and every cell of the battery should be checked so as to make sure that the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the equipment and after that change the filters. The transmission filter, fuel filters and the hydraulic filter must be frequently replaced. Before fitting them, be sure to write the date on the new filters by using a permanent marker to be able to keep track.
Once the oil change has been completed and new filters have been fitted, visually check the drive axle from beneath the equipment. Be certain to grease the axle if there is any grease fitting. Check the engine belts for any frays or cracks. If you find any, fix the issue accordingly. Afterwards, check each and every other component of the machine including the wheels. If any type of problem or fault is detected, be certain to deal with it immediately in order to make certain the machine is running at its safest and optimum levels.