Compared to a sit-down unit, the stand-up forklift unit is totally different to use. The way wherein you pick up cargo and your movements are completely different. If you do not have proper training for operating a stand-up model, you could potentially cause harm to yourself or to co-workers. When utilizing a stand-up model, you should follow the correct safety regulations. There are a few basic operating standards that should be met when operating a stand-up unit.
When starting, stand up on the lift truck in order to get a feel for the controls and the steering knob. The steering is handled utilizing the knob steering plate instead of a steering wheel. Remember that this specific knob moves very fast, therefore, you have to get used to moving it carefully in order to be sure not to over steer. The horn is located on the control handle, like with the control for the fork movement and for forwards, backwards. The floor pedal allows the forklift power to move.
If you are ready to start, turn the key to start the forklift. Be sure that your forks are retracted. If you are moving around the floor, the forks must be pointed a little upwards. Do not drive with the forks in their extended position. If you are traveling forwards, move the control handle forward and step on the pedal in order to make the lift move forward. If you are backing up, be sure to beep your horn in order to warn those around you. Look behind you before stepping on the pedal in order to make sure the way is safe and clear. Then, pull the control handle towards you while stepping on the pedal. Stay alert and focused and make sure that you are operating in a safe way at all times.
When approaching a corner with the lift truck, turn the steering knob in the direction you are heading. Make sure to keep your hands on the control handle and keep your foot on the accelerator. When turning right, the steering knob will move in a clockwise direction during forward travel. If you are turning left, your steering knob will go in a counter-clockwise direction.
If you have only operated sit down units, the stand-up versions can take some getting used to. With some training and taking some time to figure out the machine, you would be able to handle loads quickly and efficiently in little time.